Thetford Aqua Magic Style Ii Water Valve Replacement
Thetford Aqua Magic Style II is a popular toilet model in many RVs and boats. However, like any other toilet, it may require maintenance and repairs over time. One of the most common issues with this toilet is the water valve. If you are experiencing a leak or low water pressure, you may need to replace the water valve. In this article, we will guide you through the process of replacing the Thetford Aqua Magic Style II water valve.
Tools and Materials Needed
Before starting the replacement process, you will need to gather the following tools and materials:
- Thetford Aqua Magic Style II water valve
- Pliers
- Adjustable wrench
- Screwdriver (flathead and Phillips)
- Teflon tape
Step-by-Step Guide
Follow these steps to replace the Thetford Aqua Magic Style II water valve:
Step 1: Turn off the Water Supply
Before starting any work on the toilet, turn off the water supply to prevent water from spilling out. You can do this by turning the valve behind the toilet clockwise.
Step 2: Remove the Toilet from the Mounting Bolts
Remove the toilet from the mounting bolts by lifting it up and off the bolts. Be careful not to damage the wax seal around the base of the toilet.
Step 3: Remove the Water Valve
Locate the water valve at the bottom of the toilet bowl. Use pliers to loosen the nuts holding the valve in place. Once the nuts are loose, remove the valve by pulling it out. Be careful not to damage the threads on the toilet bowl.
Step 4: Install the New Water Valve
Wrap Teflon tape around the threads of the new water valve. Insert the valve into the hole in the toilet bowl and tighten the nuts with pliers. Be careful not to over-tighten the nuts as this can damage the threads.
Step 5: Reinstall the Toilet
Place the toilet back onto the mounting bolts and tighten the nuts with an adjustable wrench. Make sure the toilet is level before tightening the nuts completely.
Step 6: Turn on the Water Supply
Turn on the water supply and flush the toilet to check for leaks and proper water flow. If everything looks good, congratulations, you have successfully replaced the Thetford Aqua Magic Style II water valve!
Conclusion
Replacing the Thetford Aqua Magic Style II water valve may seem intimidating, but with the right tools and our step-by-step guide, it can be a simple and straightforward process. Remember to turn off the water supply before starting any work and to be careful not to damage the toilet threads. If you are unsure or uncomfortable with performing the replacement yourself, seek the help of a professional.