Skip to content Skip to sidebar Skip to footer

Magic Tub And Tile Refinishing Kit Spray-On Instructions

Magic Tub And Tile Refinishing Kit

Introduction

The bathroom is one of the most important rooms in a home, and it's essential to keep it looking its best. One way to do that is by refinishing your tub and tile. A Magic Tub and Tile Refinishing Kit is an affordable way to achieve a new look without the expense of replacing your existing fixtures. However, it's important to follow the spray-on instructions to ensure a successful outcome. In this article, we'll go over the steps to properly use a Magic Tub and Tile Refinishing Kit.

Preparation

Preparing Surfaces For Magic Tub And Tile Refinishing Kit

Before beginning the refinishing process, it's crucial to prepare the surfaces. Start by cleaning the tub and tile thoroughly with a mild cleanser and rinse well. If there are any chips or cracks, repair them with a porcelain repair kit before refinishing. Next, use painter's tape to protect any areas that won't be refinished, such as the walls and fixtures, as well as the drain and overflow.

Application

Applying Magic Tub And Tile Refinishing Kit

Once the surfaces are prepped, it's time to apply the Magic Tub and Tile Refinishing Kit. Shake the can for at least one minute after the mixing ball rattles. Next, test the spray on a small, inconspicuous area to make sure it's the right color and consistency. Hold the can 6-8 inches away from the surface and apply the first coat using a back-and-forth motion, slightly overlapping each pass. Don't worry if it doesn't look perfect; it will even out with subsequent coats. Allow the first coat to dry for at least 30 minutes, then apply a second coat in the same manner.

Drying and Curing

Drying And Curing Magic Tub And Tile Refinishing Kit

After the final coat is applied, allow the surfaces to dry for at least 24 hours before using the tub or shower. It's important to note that the Magic Tub and Tile Refinishing Kit needs to cure for at least 72 hours before being exposed to water. During this time, avoid any contact with the surfaces, and don't place any objects on them.

Maintenance

Maintaining Magic Tub And Tile Refinishing Kit

To keep the refinished surfaces looking their best, it's essential to follow some basic maintenance guidelines. Avoid using abrasive cleaners or scrubbers, as they can damage the finish. Stick to mild cleansers and soft cloths, and rinse the surfaces thoroughly after each use. It's also a good idea to use a non-slip mat or decals in the tub or shower to prevent any accidental slips or falls.

Conclusion

A Magic Tub and Tile Refinishing Kit is a fantastic way to refresh your bathroom without breaking the bank. By following the spray-on instructions, you can achieve a new look in just a few easy steps. Remember to take your time, prepare the surfaces properly, and allow for ample drying and curing time. With the right maintenance, your refinished tub and tile will look great for years to come.

Related video of Magic Tub and Tile Refinishing Kit Spray-On Instructions